air in system
and how to fix

air in system
and how to fix

air in system
and how to fix

Shower Pumps

Air can build up in a pump installation over time and when not used regularly. It can cause a variety of issues that are often blamed on the pump. However, a simple air test can clear out your installation and solve the issue - at no extra cost!

  • pump pulsing
  • pump running on
  • excessive noise
  • temperature fluctuation

If your installation is suffering with any of the above, it would be worth running the air test to eliminate air as a fault cause.

Need more information?



 
telephone

01793 820142

Monday - Friday, 9am - 5pm

 

 



 
fast identification

email a photo

ID for direct or nearest match. 

 

 

Complete an air test!

Follow these instructions to remove air from your pump installation.

1. Turn off pump.

2. Remove shower head from hose.

3. Let hose hang into bath or shower tray.

4. Turn the temperature to full cold.

5. Turn the shower on and run for 5 minutes.

6. Turn the temperature to full hot and run for a further 5 minutes.

7. Turn off the shower.

8. Wait at least 20 minutes.

9. Re-power the pump and turn on the shower to test.


A one time or repeated air test could solve your pump installation woes. Or you could try our Installation Fault Finder for other targeted solutions.

Do you have an uncontrolled heat source? This may cause air build up in your pipework.
Please browse our temperature control range below.

Temperature Control (NBS_ProductView)

  • Washdown

    • CAT5 package boosting

    Prevent backflow contamination of the mains water supply, while maintaining flow and pressure.

    CAT5 package boosting

    Prevent backflow contamination of the mains water supply, while maintaining flow and pressure.

    CAT5 package boosting

    Prevent backflow contamination of the mains water supply, while maintaining flow and pressure.

    Smart CAT5 Fixed

    6.0 Bar Fixed Speed Booster Set

    • Backflow Protection
    • Electronically Controlled with Flow Controller
    • Tank Size: 10 Litre, Cat 5
      Call 01793 820142 for ETA

    Email for price

    External CAT5 Washdown

    3.8 Bar Booster Set for External Use

    • Bronze Pump In GRP 18 Litre Tank
    • Includes Weir Slot to Prevent Back Flow
    • Built In Heater
      Call 01793 820142 for ETA

    £0.00£0.00£0.00

    Email for price

    If the air test does not resolve your issue, a regenerative pump that can handle air may be required.
    Please browse our quiet Supergen regenerative range below.

    Supergen Brass (NBS_ProductView)

  • Washdown

    • CAT5 package boosting

    Prevent backflow contamination of the mains water supply, while maintaining flow and pressure.

    CAT5 package boosting

    Prevent backflow contamination of the mains water supply, while maintaining flow and pressure.

    CAT5 package boosting

    Prevent backflow contamination of the mains water supply, while maintaining flow and pressure.

    Smart CAT5 Fixed

    6.0 Bar Fixed Speed Booster Set

    • Backflow Protection
    • Electronically Controlled with Flow Controller
    • Tank Size: 10 Litre, Cat 5
      Call 01793 820142 for ETA

    Email for price

    External CAT5 Washdown

    3.8 Bar Booster Set for External Use

    • Bronze Pump In GRP 18 Litre Tank
    • Includes Weir Slot to Prevent Back Flow
    • Built In Heater
      Call 01793 820142 for ETA

    Email for price

    Boosterpack 50

    Variable Speed Pump & 280 Litre Tank

    • Cold Water Boosting, CAT5 Air Gap
    • Max Pressure up to 5.5 Bar
    • Max Flow up to 120 lpm
      Call 01793 820142 for ETA

    £0.00£0.00

    Email for price

    Boosterpack 30

    Fixed Speed Pump & 280 Litre Tank

    • Cold Water Boosting, CAT5 Air Gap
    • Max Pressure up to 4.6 Bar
    • Max Flow up to 90 lpm
      Call 01793 820142 for ETA

    £0.00£0.00£0.00

    Email for price

    Mini Tank CAT5 Booster

    3.8 Bar Packaged Booster Set

    • Ryton Pump Body
    • Includes Weir Slot to Prevent Back Flow
    • Tank Size: 18 Litre, Cat 5
      Call 01793 820142 for ETA

    Email for price

    Boosterpack D2 / D3

    Fixed Speed Pump & 280 Litre Tank

    • Cold Water Boosting, CAT5 Air Gap
    • Max Pressure up to 4.5 Bar
    • Max Flow up to 105 lpm
      Call 01793 820142 for ETA

    Email for price






    about us 

    Pump World's philosophy is to provide quality pump solutions that are energy saving and low on noise without compromising on performance. 

    The Pump World team are here to help you put together the right boosting equipment to optimise your system. Our sister company, Smart Showers, sources the finest Italian shower design for a luxury bathroom experience.

    Together, Pump World and Smart Showers provide an all-encompassing system solution - designed to suit you.

    Pump World   A limited company, registered in England. VAT No: GB535638919.
    Company Number : 02433506.  Registered At : Unit 11 Woodside Road, Swindon, SN3 4WA.

     

    payment methods

               

    Text/HTML