air in system
and how to fix

air in system
and how to fix

air in system
and how to fix

Shower Pumps

Air can build up in a pump installation over time and when not used regularly. It can cause a variety of issues that are often blamed on the pump. However, a simple air test can clear out your installation and solve the issue - at no extra cost!

  • pump pulsing
  • pump running on
  • excessive noise
  • temperature fluctuation

If your installation is suffering with any of the above, it would be worth running the air test to eliminate air as a fault cause.

Need more information?



 
telephone

01793 820142

Monday - Friday, 9am - 5pm

 

 



 
fast identification

email a photo

ID for direct or nearest match. 

 

 

Complete an air test!

Follow these instructions to remove air from your pump installation.

1. Turn off pump.

2. Remove shower head from hose.

3. Let hose hang into bath or shower tray.

4. Turn the temperature to full cold.

5. Turn the shower on and run for 5 minutes.

6. Turn the temperature to full hot and run for a further 5 minutes.

7. Turn off the shower.

8. Wait at least 20 minutes.

9. Re-power the pump and turn on the shower to test.


A one time or repeated air test could solve your pump installation woes. Or you could try our Installation Fault Finder for other targeted solutions.

Do you have an uncontrolled heat source? This may cause air build up in your pipework.
Please browse our temperature control range below.

Temperature Control (NBS_ProductView)

  • Hot Water Cylinders

  • Oso Super Xpress VIP SX

    Highly Efficient Floor Standing Cylinder

    • 120 - 300 Litre Capacity
    • Superior Duplex 2304 Stainless Steel

      Call 01793 820142 for ETA

    Ecocirc (N)

    Wet Rotor Circulator Range 4.0m - 8.0m

    • Stainless Steel Body
    • 130mm or 180mm Port to Port
    • Domestic Hot Water Systems
      Call 01793 820142 for ETA

    If the air test does not resolve your issue, a regenerative pump that can handle air may be required.
    Please browse our quiet Supergen regenerative range below.

    Supergen Brass (NBS_ProductView)

  • Hot Water Cylinders

  • Oso Super Xpress VIP SX

    Highly Efficient Floor Standing Cylinder

    • 120 - 300 Litre Capacity
    • Superior Duplex 2304 Stainless Steel

      Call 01793 820142 for ETA

    Ecocirc (N)

    Wet Rotor Circulator Range 4.0m - 8.0m

    • Stainless Steel Body
    • 130mm or 180mm Port to Port
    • Domestic Hot Water Systems
      Call 01793 820142 for ETA

    Cylinder Indirect 6.0 Bar

    Highly Efficient Floor Standing Cylinder

    • 200 - 500 Litre Capacity
    • Corrosion Resistant Manufacture
    • Full Unvented Kit Supplied
      Call 01793 820142 for ETA

    Cylinder Indirect 3.0 Bar

    Highly Efficient Floor Pressurised Cylinder

    • 125 - 500 Litre Capacity
    • Superior Duplex Stainless Steel
    • Full Unvented Kit Supplied
      Call 01793 820142 for ETA

    Cylinder Direct 6.0 Bar

    Highly Efficient Pressurised Cylinder

    • 200 - 300 Litre Capacity
    • Corrosion Resistant Manufacture
    • Full Unvented Kit Supplied
      Call 01793 820142 for ETA

    Cylinder Direct 3.0 Bar

    Highly Efficient Pressurised Cylinder

    • 125 - 300 Litre Capacity
    • Superior Duplex Stainless Steel
    • Full Unvented Kit Supplied
      Call 01793 820142 for ETA

    Cylinder Rapid Recovery 6.0 Bar

    High Demand Floor Standing Cylinder

    • 215, 255, 305, 400, 500, 575 Litre Capacities
    • Fast Heat Up & Recovery Times
    • Made to Order - Bespoke to You
      Call 01793 820142 for ETA

    Cylinder Indirect 3.0 Bar

    Highly Efficient Pressurised Cylinder

    • 130 - 500 Litre Optional Capacity
    • Superior Duplex Stainless Steel
    • High Flow Rates
      Call 01793 820142 for ETA

    Cylinder Indirect 3.0 Bar Horizontal

    Highly Efficient Pressurised Cylinder

    • 215 - 500 Litre Optional Capacity
    • Superior Duplex Stainless Steel
    • High Flow Rates
      Call 01793 820142 for ETA

    Cylinder Indirect 6.0 Bar

    Highly Efficient Floor Standing Cylinder

    • 215 - 500 Litre Optional Capacity
    • Superior Duplex Stainless Steel
    • High Flow Rates
      Call 01793 820142 for ETA

    Cylinder Indirect 6.0 Bar Horizontal

    Highly Efficient Floor Standing Cylinder

    • 215 - 500 Litre Optional Capacity
    • Superior Duplex Stainless Steel
    • High Flow Rates
      Call 01793 820142 for ETA

    Oso Super Coil SC

    Highly Efficient Floor Standing Cylinder

    • 120 - 300 Litre Capacity
    • Superior Duplex 2304 Stainless Steel

      Call 01793 820142 for ETA

    Cylinder Rapid Recovery 3.0 Bar

    High Demand Floor Standing Cylinder

    • 200, 250, 300, 400, 500, 600 Litre Capacities
    • Fast Heat Up & Recovery Times
    • Made to Order - Bespoke to You
      Call 01793 820142 for ETA

    Hot Water Waste Sets

    Grey Waste Water Lifting Unit

    • Max Head 6.0 m - 11.0 m
    • Domestic Waste Water Removal
    • Pre-Assembled, Ready for Connection

    Cylinder Indirect 6.0 Bar 300 Litre

    Delta Powercyl Floor Standing Cylinder

    • Small Hotels / Guest Houses
    • Highly Efficient Foam Insulation
    • High Flow Rates
      Call 01793 820142 for ETA

    Vessel Vertical 70°C

    On Sale!
    Suitable for Use with Hot Water Cylinder

    • 12 Litre, 25 Litre Capacities
    • 10.0 Bar Max Working Pressure
    • Suitable for Water up to 70°C

      Next Working Day Delivery

    From £171.60 £148.80 inc. VAT

    Vessel Vertical 90°C

    Smooth Out Pump Operation

    • 8 Litre, 24 Litre Capacities
    • 10.0 Bar Max Working Pressure
    • Suitable for Water up to 90°C

      Next Working Day Delivery

    From £183.60 inc. VAT

    Smartcirc (N) BUPA 130mm

    On Sale!
    Wet Rotor Circulator Range 4.0m - 6.0m

    • Stainless Steel, 130mm Port to Port
    • Drinking Water Systems

      Call 01793 820142 for ETA

    From £381.60 £219.60 inc. VAT

    Smartcirc (N) 20-4/150

    On Sale!
    Wet Rotor Circulator 4.0m

    • Stainless Steel, 150mm Port to Port
    • Secondary Hot Water Systems
    • Drinking Water Systems

      Next Working Day Delivery

    £400.80 £230.40 inc. VAT






    about us 

    Pump World's philosophy is to provide quality pump solutions that are energy saving and low on noise without compromising on performance. 

    The Pump World team are here to help you put together the right boosting equipment to optimise your system. Our sister company, Smart Showers, sources the finest Italian shower design for a luxury bathroom experience.

    Together, Pump World and Smart Showers provide an all-encompassing system solution - designed to suit you.

    Pump World   A limited company, registered in England. VAT No: GB535638919.
    Company Number : 02433506.  Registered At : Unit 11 Woodside Road, Swindon, SN3 4WA.

     

    payment methods

               

    Text/HTML