Supergen Brass (NBS_ProductView)

Drainage

domestic & commercial applications

Plastic and stainless steel submersibles suitable for general drainage and quick, emergency dewatering.

domestic & commercial applications

Plastic and stainless steel submersibles suitable for general drainage and quick, emergency dewatering.

domestic & commercial applications

Plastic and stainless steel submersibles suitable for general drainage and quick, emergency dewatering.

Puddle Sucker

From £0.00
Drains Down to 1 mm

• Domestic & Commercial Use
• Suitable for Flat Surfaces
• Electronic Control Option Available

Models

From£0.00 exc. VAT

Description

 

Puddle Sucker : residue puddle pump.

Application : Suitable for the removal of nuisance water and cellar drainage.

This Puddle Sucker has the ability to pump water down to approx 1mm while the remaining flood water can be swept into the pump for removal.

Stainless steel outer case, shaft and motor case. Cast iron motor lid, pump casing and volute. Equipped with non return valve on the suction of the pump to help stop any return of water.

Bottom plate made with a cushioned rubber to help against damaging bottoms of tanks. Complete with internal check valve and has to be primed if using in shallow water.

Twin mechanical seals, carbon ceramic and silicon carbide in a lubricated chamber. Complete with 10 metres of power cable.

This pump can be used with electronic control for automatic operation- the electronic control comprises a utility panel and sensor.

Please note the available model options and ensure the correct model is chosen prior to purchase.

 

 

 

 

 

 

Specifications

Maximum Head
11.0 m

Maximum Flow
180 lpm

Connection
1.25"

Dimensions
D x H (mm)
167 x 370

 

 

Installation Kit

Puddle Sucker
Qty 1

Utility Panel & Sensor
Optional

 

 

 

 

 
 

Related Products

Optional Size 1.0" or 1.25"

• General Purpose Fittings
• Suitable for Submersibles

From£0.00 exc. VAT

Optional Span Size

• General Purpose Fittings
• Suitable for Submersibles

From£0.00 exc. VAT

Drainage

domestic & commercial applications

Plastic and stainless steel submersibles suitable for general drainage and quick, emergency dewatering.

domestic & commercial applications

Plastic and stainless steel submersibles suitable for general drainage and quick, emergency dewatering.

domestic & commercial applications

Plastic and stainless steel submersibles suitable for general drainage and quick, emergency dewatering.

Puddle Sucker

From £0.00
Drains Down to 1 mm

• Domestic & Commercial Use
• Suitable for Flat Surfaces
• Electronic Control Option Available

Models

From£0.00 exc. VAT

Description

 

Puddle Sucker : residue puddle pump.

Application : Suitable for the removal of nuisance water and cellar drainage.

This Puddle Sucker has the ability to pump water down to approx 1mm while the remaining flood water can be swept into the pump for removal.

Stainless steel outer case, shaft and motor case. Cast iron motor lid, pump casing and volute. Equipped with non return valve on the suction of the pump to help stop any return of water.

Bottom plate made with a cushioned rubber to help against damaging bottoms of tanks. Complete with internal check valve and has to be primed if using in shallow water.

Twin mechanical seals, carbon ceramic and silicon carbide in a lubricated chamber. Complete with 10 metres of power cable.

This pump can be used with electronic control for automatic operation- the electronic control comprises a utility panel and sensor.

Please note the available model options and ensure the correct model is chosen prior to purchase.

 

 

 

 

 

 

Specifications

Maximum Head
11.0 m

Maximum Flow
180 lpm

Connection
1.25"

Dimensions
D x H (mm)
167 x 370

 

 

Installation Kit

Puddle Sucker
Qty 1

Utility Panel & Sensor
Optional

 

 

 

 

 
 

Related Products

Optional Size 1.0" or 1.25"

• General Purpose Fittings
• Suitable for Submersibles

From£0.00 exc. VAT

Optional Span Size

• General Purpose Fittings
• Suitable for Submersibles

From£0.00 exc. VAT

 



 
telephone

01793 820142

Monday - Friday, 9am - 5pm

 

 



 
fast identification

email a photo

ID for direct or nearest match. 

 

 

How does a shower pump work?

A shower pump works by pumping your low-pressure water through an impeller, which then spins very quickly, using centrifugal force to eject the water at a higher pressure than it came in at.
 

Do I choose plastic or brass construction?

The plastic bodied Supergen pumps offer a cost-effective solution for boosting. The Supergen 58TX and Supergen 15SX are fitted with low speed motors that reduce noise, not performance.

The brass bodied Supergen range are uniquely machined with premium quality brass that is cast (not stamped) to allow a smooth water flow around the impeller, reducing vibration and the associated noise level to a minimum. This heavy duty construction means a longer running life. They can also handle hotter water, deal with air more effectively and are not demanding in terms of flow rate.

 

Which shower pump do I need?

This is dependent of the performance you require and the location of the installation. You can size your own using our Supergen Selector, or speak to our helpful team for advice.  

For product advice or recommendations, call or email our team today.

 

 

 

Testimonials







about us 

Pump World's philosophy is to provide quality pump solutions that are energy saving and low on noise without compromising on performance. 

The Pump World team are here to help you put together the right boosting equipment to optimise your system. Our sister company, Smart Showers, sources the finest Italian shower design for a luxury bathroom experience.

Together, Pump World and Smart Showers provide an all-encompassing system solution - designed to suit you.

Pump World   A limited company, registered in England. VAT No: GB535638919.
Company Number : 02433506.  Registered At : Unit 11 Woodside Road, Swindon, SN3 4WA.

 

payment methods

           

Text/HTML