Live Chat 2017


** Orders placed between 30th May and 3rd June will be processed and despatched week commencing 6th June **



 

Accumulators

lightweight & compact cold water storage

 

What's available?

Our accumulator range covers nominal water capacities up to 450 litres. They provide increased flow for multi-outlet demand. Available with or without upstream kits.

 

  • Accumulator Kits

  • cold water storage with upstream kit

    No moving parts, quiet and reliable for boosting domestic and commercial water flow..

    cold water storage with upstream kit

    No moving parts, quiet and reliable for boosting domestic and commercial water flow..

    cold water storage with upstream kit

    No moving parts, quiet and reliable for boosting domestic and commercial water flow..

    Accumulator Steel

    For High Pressure, Low Flow Applications

    • 60 - 130 Litre Capacity Options
    • Single Diaphragm Design
    • Optional Install Kit
      Call 01793 820142 for ETA

    Accumulator Superstream

    For High Pressure, Low Flow Applications

    • 130 - 450 Litre Capacity Options
    • Lightweight Composite Construction
    • Upstream Kit Included
      Call 01793 820142 for ETA

    Accumulator Composite

    For High Pressure, Low Flow Applications

    • 200 - 450 Litre Capacity Options
    • Lightweight Composite Construction
    • Optional Install Kit
      Call 01793 820142 for ETA

    Accumulator Vessel Boost

    Ideal for Multi-Bathroom Applications

    • 220V, 400V & 660V Vessel Models
    • Optional Pump to Boost Pressure

      Call 01793 820142 for ETA

     

    What is a cold water accumulator?

    Much like a break tank, a cold water accumulator is used for water storage. Traditional unvented cylinders depend upon incoming mains pressure and water volume to produce high flow rates but, if mains flow is poor, the accumulator boosts the flow rate available to hot and cold water taps by storing water in a membrane diaphragm. The accumulator then delivers this water to the cylinder and cold outlets when demand exceeds the mains flow rate available.

    Can I use an accumulator to increase water pressure?

    No, accumulators do not increase water pressure. They simply allow the water system to work at its optimum pressure capacity by supplementing the flow of water when the system has open outlets (i.e. the tap is running). When the outlets are closed, the accumulator shuts off this additional flow until it is required again. To sum up, an accumulator cannot increase the pressure from the mains but it will increase the flow. The option of an added booster pump can raise system pressure to 3.5 Bar.

    Do I have to use an upstream kit with a cold water accumulator?

    Yes, an upstream kit is required (available at Pump World in 22mm or 28mm sizes) to connect to the cold mains and hot water cylinder. The upstream kit is required for operation. Use without the upstream kit invalidates warranty.

     

     


     

    not found what you're looking for?

    try these useful links below

    not found what you're looking for?

    try these useful links below

    not found what you're looking for?

    try these useful links below







    About Us

    Our philosophy is to provide quality pump solutions that will be energy saving and
    low on noise but still provide a high performance. 

    Contact our Pump Solver on 01793 820142 for technical advice, problem solving and recommendations. Our team are here to help you put together the right package of matching equipment to optimise your system.

    Pump World   A limited company, registered in England.
    Company Number : 02433506.  Registered At : Unit 11 Woodside Road, Swindon, SN3 4WA.



      Subscribe to our Newsletter


    Accepted Payment Methods


               
     

    Text/HTML