£0.00

air in system
and how to fix

air in system
and how to fix

air in system
and how to fix

Shower Pumps

Air can build up in a pump installation over time and when not used regularly. It can cause a variety of issues that are often blamed on the pump. However, a simple air test can clear out your installation and solve the issue - at no extra cost!

  • pump pulsing
  • pump running on
  • excessive noise
  • temperature fluctuation

If your installation is suffering with any of the above, it would be worth running the air test to eliminate air as a fault cause.

Need more information?



 
telephone

01793 820142

Monday - Friday, 9am - 5pm

 

 



 
fast identification

email a photo

ID for direct or nearest match. 

 

 

Complete an air test!

Follow these instructions to remove air from your pump installation.

1. Turn off pump.

2. Remove shower head from hose.

3. Let hose hang into bath or shower tray.

4. Turn the temperature to full cold.

5. Turn the shower on and run for 5 minutes.

6. Turn the temperature to full hot and run for a further 5 minutes.

7. Turn off the shower.

8. Wait at least 20 minutes.

9. Re-power the pump and turn on the shower to test.


A one time or repeated air test could solve your pump installation woes. Or you could try our Installation Fault Finder for other targeted solutions.

Do you have an uncontrolled heat source? This may cause air build up in your pipework.
Please browse our temperature control range below.

Temperature Control (NBS_ProductView)

domestic & commercial

Stainless steel or bronze pump housing for clean water circulation.

domestic & commercial

Stainless steel or bronze pump housing for clean water circulation.

domestic & commercial

Stainless steel or bronze pump housing for clean water circulation.

Ecocirc PRO

    Ecocirc PRO

    £0.00
    High Efficiency Hot Water Circulators

    • Timer & Temperature Probe Available
    • Max Head up to 1.0 m
    • Length 65 mm or 110 mm
    £0.00 exc. VAT
    £0.00£0.00
    - +
    Add to Basket Return

    Description

     

    Hot water circulation pumps, high efficient with stepless variable speed.

    The ecocirc PRO are highly efficient hot water circulation pumps, which are based on the proven shaftless spherical motor design with ECM technology and permanent magnet. This design combines the best efficiency and low noise at an affordable price.

    The ecocirc PRO features includes automatic ventilation mode and heat insulation shell as well as optional clock and/or temperature setting.

    Variants of these circulation pumps are suitable for use in houses and multiple occupancy dwellings. They comply with Drinking Water Regulations, and by circulating the drinking water they provide effective protection against legionella. Warm water circulation ensures that warm water is immediately available even when the furthest positioned tap is turned on.

    The new, stepless adjustable speed models require a maximum of only 3-9 W!

    Please ensure correct model is chosen prior to purchase. To check suitability for your application, please call our technical team on 01793 820142.

    Not seeing the specification you need? There are more model options available, please call our team on 01793 820142 for a quotation.

     

    Useful Downloads

     View Data Sheet
          product specification, available for download
     

     

     

     

    Specifications

    Ecocirc PRO 65 mm
    ... with Temperature Probe
    ... with Timer
    ... with Temp Probe & Timer
    Max Head
    Connection
    Length
    CPEB5000
    CPEB5100
    CPEB5200
    CPEB5300
    1.0 m
    1/2"
    65 mm
    Ecocirc PRO 110 mm
    ... with Temperature Probe
    ... with Timer
    ... with Temp Probe & Timer
    Max Head
    Connection
    Length
    CPEB5010
    CPEB5110
    CPEB5210
    CPEB5310
    1.0 m
    1.25"
    110 mm

     

     

    Useful Information

     Find A Local Stockist
      we support independent merchants
     

     

     

     
     

    Related Products

    Ecocirc XLPLUS

    Add to Basket

    High Efficiency Circulators

    • Max Head up to 12.0 m
    • Max Flow up to 1000 lpm
    • Length up to 360 mm

    £0.00 exc. VAT
    From£381.60£237.60
    https://www.pumpworld.co.uk/Our-Products/ProdDetail/catid/41501/eid/70988/ecocirc-n
    https://www.pumpworld.co.uk/Our-Products/ProdDetail/catid/41501/eid/70988/ecocirc-n

    Ecocirc (N)

    https://www.pumpworld.co.uk/Our-Products/ProdDetail/catid/41501/eid/70988/ecocirc-n Add to Basket

    High Efficiency Circulators

    • Pump Housing Stainless Steel
    • Max Head up to 8.0m
    • Length 130mm or 180mm

    £0.00 exc. VAT
    £0.00

    If the air test does not resolve your issue, a regenerative pump that can handle air may be required.
    Please browse our quiet Supergen regenerative range below.

    Supergen Brass (NBS_ProductView)

    Secondary Hot Water

    domestic & commercial

    Stainless steel or bronze pump housing for clean water circulation.

    domestic & commercial

    Stainless steel or bronze pump housing for clean water circulation.

    domestic & commercial

    Stainless steel or bronze pump housing for clean water circulation.

      Ecocirc PRO

      £0.00 £0.00
      High Efficiency Hot Water Circulators

      • Timer & Temperature Probe Available
      • Max Head up to 1.0 m
      • Length 65 mm or 110 mm
      £0.00 exc. VAT
      - +
      Add to Basket Return

      Description

       

      Hot water circulation pumps, high efficient with stepless variable speed.

      The ecocirc PRO are highly efficient hot water circulation pumps, which are based on the proven shaftless spherical motor design with ECM technology and permanent magnet. This design combines the best efficiency and low noise at an affordable price.

      The ecocirc PRO features includes automatic ventilation mode and heat insulation shell as well as optional clock and/or temperature setting.

      Variants of these circulation pumps are suitable for use in houses and multiple occupancy dwellings. They comply with Drinking Water Regulations, and by circulating the drinking water they provide effective protection against legionella. Warm water circulation ensures that warm water is immediately available even when the furthest positioned tap is turned on.

      The new, stepless adjustable speed models require a maximum of only 3-9 W!

      Please ensure correct model is chosen prior to purchase. To check suitability for your application, please call our technical team on 01793 820142.

      Not seeing the specification you need? There are more model options available, please call our team on 01793 820142 for a quotation.

       

      Useful Downloads

       View Data Sheet
              product specification, available for download
       

       

       

       

      Specifications

      Ecocirc PRO 65 mm
      ... with Temperature Probe
      ... with Timer
      ... with Temp Probe & Timer
      Max Head
      Connection
      Length
      CPEB5000
      CPEB5100
      CPEB5200
      CPEB5300
      1.0 m
      1/2"
      65 mm
      Ecocirc PRO 110 mm
      ... with Temperature Probe
      ... with Timer
      ... with Temp Probe & Timer
      Max Head
      Connection
      Length
      CPEB5010
      CPEB5110
      CPEB5210
      CPEB5310
      1.0 m
      1.25"
      110 mm

       

       

      Useful Information

       Find A Local Stockist
        we support independent merchants
       

       

       

       
       

      Related Products

      £0.00 exc. VAT
      £0.00

      Smartcirc (N) BUPA

      On Sale!

      Wet Rotor Circulators

      • Pump Housing Stainless Steel
      • Max Head up to 6.0 m
      • Length 130mm or 150mm

      From£381.60£237.60
      https://www.pumpworld.co.uk/Our-Products/ProdDetail/catid/41501/eid/70988/ecocirc-n

      Ecocirc (N)

      https://www.pumpworld.co.uk/Our-Products/ProdDetail/catid/41501/eid/70988/ecocirc-n Add to Basket

      High Efficiency Circulators

      • Pump Housing Stainless Steel
      • Max Head up to 8.0m
      • Length 130mm or 180mm

      exc. VAT
      £0.00£0.00
      Download this file Download this file Download this file





      about us 

      Pump World's philosophy is to provide quality pump solutions that are energy saving and low on noise without compromising on performance. 

      The Pump World team are here to help you put together the right boosting equipment to optimise your system. Our sister company, Smart Showers, sources the finest Italian shower design for a luxury bathroom experience.

      Together, Pump World and Smart Showers provide an all-encompassing system solution - designed to suit you.

      Pump World   A limited company, registered in England. VAT No: GB535638919.
      Company Number : 02433506.  Registered At : Unit 11 Woodside Road, Swindon, SN3 4WA.

       

      payment methods

                 

      Text/HTML