air in system
and how to fix

air in system
and how to fix

air in system
and how to fix

Shower Pumps

Air can build up in a pump installation over time and when not used regularly. It can cause a variety of issues that are often blamed on the pump. However, a simple air test can clear out your installation and solve the issue - at no extra cost!

  • pump pulsing
  • pump running on
  • excessive noise
  • temperature fluctuation

If your installation is suffering with any of the above, it would be worth running the air test to eliminate air as a fault cause.

Need more information?



 
telephone

01793 820142

Monday - Friday, 9am - 5pm

 

 



 
fast identification

email a photo

ID for direct or nearest match. 

 

 

Complete an air test!

Follow these instructions to remove air from your pump installation.

1. Turn off pump.

2. Remove shower head from hose.

3. Let hose hang into bath or shower tray.

4. Turn the temperature to full cold.

5. Turn the shower on and run for 5 minutes.

6. Turn the temperature to full hot and run for a further 5 minutes.

7. Turn off the shower.

8. Wait at least 20 minutes.

9. Re-power the pump and turn on the shower to test.


A one time or repeated air test could solve your pump installation woes. Or you could try our Installation Fault Finder for other targeted solutions.

Do you have an uncontrolled heat source? This may cause air build up in your pipework.
Please browse our temperature control range below.

Temperature Control (NBS_ProductView)

Pressure Regulator

Optional Connection Size

• Dial Up Pressure Reducing Valve
• Stabilise Inlet Pressure

  Call 01793 820142 for ETA

Lever Ball Valve

Optional Connection Size

• Compact Design
• Reliable Isolation
  Call 01793 820142 for ETA

If the air test does not resolve your issue, a regenerative pump that can handle air may be required.
Please browse our quiet Supergen regenerative range below.

Supergen Brass (NBS_ProductView)

SMB

Variable Speed Single, Twin or Trio Sets

• Large Domestic / Commercial Boosting
• Max Head up to 150.0 m
• Max Flow up to 1500 lpm
  Call 01793 820142 for ETA  

Smart CAT5 Fixed

6.0 Bar Fixed Speed Booster Set

• Backflow Protection
• Electronically Controlled with Flow Controller
• Tank Size: 10 Litre, Cat 5
  Call 01793 820142 for ETA

Boosterpack 50

Variable Speed Pump & 280 Litre Tank

• Cold Water Boosting, CAT5 Air Gap
• Max Pressure up to 5.5 Bar
• Max Flow up to 120 lpm
  Call 01793 820142 for ETA

Break Tank Slimline

One Piece Break Tank Range with Install Kit

• 500 Litre & 1000 Litre
• Pre-Insulated for Stable Temperature
• WRAS Approved Polymer
  Call 01793 820142 for ETA

Break Tank GRP One Piece

One Piece GRP Break Tank with Install Kit

• 500 Litre to 2000 Litre Capacity
• Optional CAT5 Air Gap & Frame
• WRAS / KIWA (Regulation 4)
  Call 01793 820142 for ETA

Break Tank GRP Two Piece

Two Piece GRP Break Tank with Install Kit

• 1000 Litre to 2000 Litre Capacity
• Optional CAT5 Air Gap & Frame
• WRAS / KIWA (Regulation 4)
  Call 01793 820142 for ETA

Break Tank Cylindrical

One Piece Break Tank Range with Install Kit

• 300 Litre, 500 Litre, 720 Litre
• Pre-Insulated for Stable Temperature
• WRAS Approved Polymer
  Call 01793 820142 for ETA

Smartboost Single 12-EB

Variable Speed Pump with Install Kit

• Water Boosting
• Max Pressure up to 7.9 Bar
• Max Flow up to 130 lpm
  Next Working Day Delivery

PVC Delivery Layflat Hose

Optional Size & Length

• 1.0" ID (25 mm) or 1.25" ID (32 mm)
• Length 10.0 m, 20.0 m or 30.0 m
• Working Pressure 4.0 Bar
  Next Working Day Delivery

Advance Large Conditioners

Advanced Domestic Scale Control

• Reverse the Effects of Hard Water
• No External Power Required
• 10 Year Warranty
  Call 01793 820142 for ETA

External CAT5 Washdown

3.8 Bar Booster Set for External Use

• Bronze Pump In GRP 18 Litre Tank
• Includes Weir Slot to Prevent Back Flow
• Built In Heater
  Call 01793 820142 for ETA

EVE V/S Digital

Variable Shower Pump

• 1.5, 2.0, 3.0 Bar Pressure
• Medium Noise Level
• 22mm Flexible Hoses Supplied
  Next Working Day Delivery

Smartpro Single 12e-SMP

Variable Speed Pump with Install Kit

• Domestic / Light Commercial Boosting
• Max Pressure up to 6.6 Bar
• Max Flow up to 140 lpm
  Next Working Day Delivery

Break Tank Baffled

One Piece Break Tank Range with Install Kit

• 280 Litre, 350 Litre, 400, 500 Litre
• Ideal for Water Transportation
• WRAS Approved Polymer
  Call 01793 820142 for ETA

Break Tank GRP One Piece

One Piece GRP Break Tank with Install Kit

• 1000 Litre to 2000 Litre Capacity
• Optional CAT5 Air Gap & Frame
• WRAS / KIWA (Regulation 4)
  Call 01793 820142 for ETA

Smartboost Meta

Variable Speed Pumps with Install Kit

• Domestic / Garden / Irrigation
• Max Pressure up to 4.7 Bar
• Max Flow up to 130 lpm
  Call 01793 820142 for ETA

Boosterpack D2 / D3

Fixed Speed Pump & 280 Litre Tank

• Cold Water Boosting, CAT5 Air Gap
• Max Pressure up to 4.5 Bar
• Max Flow up to 105 lpm
  Call 01793 820142 for ETA

Break Tank GRP Sectional

IFB / EFB / TIF Break Tank with Install Kit

• 2000 Litre to 8000 Litre Capacity
• Optional CAT5 Air Gap & Partitions
• WRAS / KIWA (Regulation 4)
  Call 01793 820142 for ETA

Smartpro Single 12-EB

Variable Speed Pump with Install Kit

• Water Boosting
• Max Pressure up to 5.8 Bar
• Max Flow up to 130 lpm
  Next Working Day Delivery

Systempro MDPE

Variable Speed with Optional Insulation

• Domestic / Light Commercial Boosting
• Pressure up to 6.5 Bar
• Flow up to 120 lpm
  Call 01793 820142 for ETA

Systempro MDPE Insulated

Variable Speed Booster Range

• Domestic / Light Commercial Boosting
• Pressure up to 6.5 Bar
• Flow up to 120 lpm
  Call 01793 820142 for ETA

Superpro with Flow Switch

Fixed Speed Pump Range with Install Kit

• Flow Switch Control
• Max Pressure up to 4.5 Bar
• Max Flow up to 70 lpm
  Call 01793 820142 for ETA

Flexible THD Short Inlet
(3/4" Nut)

THD Shower Pump Spare

• 3/4" Female Nut x 3/4" Female Nut
• Sold in Quantities of 2

  Next Working Day Delivery

£21.60 inc. VAT

E.sybox Brass Union Kit 1.0"

1.0" Connections

• Brass Construction
• E.sybox Accessory
• Quantity 2

  Next Working Day Delivery

£34.80 inc. VAT

Flexible THD Superboost
(22 mm Valve)

THD Superboost Shower Pump Spare

• 22mm Push Fit x 22mm Push Fit Valve
• Sold in Quantities of 2

  Next Working Day Delivery

From £26.16 inc. VAT

Flexible Set Supergen 15MM

Replacement Flexible Sets

• Anti-Vibration Braided Hoses
• 15 mm Connections
• Supergen 58TX or Supergen 15SX
  Next Working Day Delivery

From £36.00 inc. VAT

Flexible Set Supergen
(22mm Large Bore)

Supergen Large Bore Flexible Set

• 3/4" Nut x 22mm Pushfit
• Sold in Quantities of 2
  Next Working Day Delivery

From £48.00 inc. VAT

Flexible Set Supergen Brass 22MM

Replacement Flexible Sets

• Anti-Vibration Braided Hoses
• 22 mm Connections
• Supergen Brass Pumps
  Next Working Day Delivery

From £50.40 inc. VAT

Acoustic Rubber Mat

On Sale!
Optional Dimensions

• Absorbs Vibration in Pump Installation
• Hardwearing Rubber
• 15 mm Thickness

  Next Working Day Delivery

From £46.80 £39.60 inc. VAT

Big Blue Cartridge Housing 10"

Complete with Bracket & Spanner

• 1.5" BSP Inlet & Outlet
• Potable or Private Water Supply

  Call 01793 820142 for ETA

£195.60 inc. VAT






about us 

Pump World's philosophy is to provide quality pump solutions that are energy saving and low on noise without compromising on performance. 

The Pump World team are here to help you put together the right boosting equipment to optimise your system. Our sister company, Smart Showers, sources the finest Italian shower design for a luxury bathroom experience.

Together, Pump World and Smart Showers provide an all-encompassing system solution - designed to suit you.

Pump World   A limited company, registered in England. VAT No: GB535638919.
Company Number : 02433506.  Registered At : Unit 11 Woodside Road, Swindon, SN3 4WA.

 

payment methods

           

Text/HTML