This kit has been designed for the pumping of shower waste water. The kit includes high flow shower drain pump, flow sensors, surge damper and Drydeck control unit. Gulley is not included unless specified - there are a variety of options available, please enquire for more information.

The Drydeck 20 is designed specifically to solve shower drainage problems in modern wetrooms. With the Drydeck 20, a step-free shower area is achievable. Ideal if you are looking to create an en-suite bathroom, install a new shower, convert a loft or adding a wetroom. With a flow capacity up to 20 lpm the Drydeck can cope with most mixer and power showers.

Quiet operation - the pump speed adjusts to changes in the shower flow rate. No cleaning necessary as there is no filter in the waste. Non-return valves prevent odours escaping. Easily concealed components.

• The Drydeck 20 control unit uses flow sensors to measure the flow rate of water into the shower.
• The pump speed is controlled directly by the control unit which uses the signals sent from the flow sensors to adjust the pump speed to match the flow from the shower. This minimises suction noise at the gulley.
• A simple setup is required to match the pump performance to the characteristics of the installation.

The Drydeck system is designed to work on shower bases with an adequate fall to the gulley. Where the fall is insufficient, the water will not refill the gulley rapidly enough and so suction noise will be increased. We recommend the use of a shower former i.e. Impey Aqua Dec or equivalent. This eliminates the risks of puddling or insufficient fall to the gulley. Forming a shower base by hand is a highly skilled task and should be carried out by a trained installer. Do not attempt this if you are unsure and seek professional advice.

To check suitability for your application, please call our technical team on 01793 820142.

Useful Downloads

 View Data Sheet
  product specification, available for download