Live Chat 2017



Puddle Sucker

Product Code: AD-WR3000
Drains Down to 1 mm

• Domestic & Commercial Use
• Suitable for Flat Surfaces
• Electronic Control Option Available


£531.60 inc. VAT


Puddle Sucker : residue puddle pump.

Application : Suitable for the removal of nuisance water and cellar drainage.

This Puddle Sucker has the ability to pump water down to approx 1mm while the remaining flood water can be swept into the pump for removal.

Stainless steel outer case, shaft and motor case. Cast iron motor lid, pump casing and volute. Equipped with non return valve on the suction of the pump to help stop any return of water.

Bottom plate made with a cushioned rubber to help against damaging bottoms of tanks. Complete with internal check valve and has to be primed if using in shallow water.

Twin mechanical seals, carbon ceramic and silicon carbide in a lubricated chamber. Complete with 10 metres of power cable.

This pump can be used with electronic control for automatic operation. The pump is supplied with a utility panel and sensor.

Please note the available model options and ensure the correct model is chosen prior to purchase.

EU Manufacture
Experienced DIY person or competent plumber required for installation






Maximum Head11.0 m

Maximum Flow185 lpm

Motor Rating0.48 kw, 230 V

Solids0 mm

Discharge1.25" Hose Barb

Dimensions D x H (mm)Ø 167 x 370



Installation Kit

Puddle SuckerQty 1

Power Cable 10mQty 1





Related Products

Optional Length

• 1.25" ID (32 mm)
• Max. Pressure 6.0 Bar
• Shock Resistant Construction

From£92.40 inc. VAT

Optional Size 1.0" or 1.25"

• General Purpose Fittings
• Suitable for Submersibles

From£26.40 inc. VAT

Optional Span Size

• General Purpose Fittings
• Suitable for Submersibles

From£11.94 inc. VAT


  • Puddle Sucker
    Data Sheet
    17 Jun 19
  • Testimonials

    . . . a thoroughly knowledgeable and reliable service from Pump World . . .

    . . . I highly recommend Pump World and will be using them again . . .

    . . . love the pumps - easy to install and do what they say on the packet . . .

    About Us

    Our philosophy is to provide quality pump solutions that will be energy saving and
    low on noise but still provide a high performance. 

    Contact our Pump Solver on 01793 820142 for technical advice, problem solving and recommendations. Our team are here to help you put together the right package of matching equipment to optimise your system.

    Pump World   A limited company, registered in England.
    Company Number : 02433506.  Registered At : Unit 11 Woodside Road, Swindon, SN3 4WA.

      Subscribe to our Newsletter

    Accepted Payment Methods

                Worldpay Payments Processing