Live Chat 2017


COVID-19 Notice - Deliveries are continuing with heightened measures to ensure the safety of our customers and couriers. For technical advice and pump availability, call on 01793 820142. 




COVID-19 Notice - Deliveries are continuing with heightened measures to ensure the safety of our customers and couriers. For technical advice and pump availability, call on 01793 820142. 


Case Studies

for a variety of applications

Working on a bathroom renovation? Looking to boost low water pressure in kitchen tap, shower, bath, whole house, or commercial property? Perhaps, you need to replace a shower pump, heating circulator, or submersible. Browse through our case studies below and contact us for help achieving your project goals.

Case Studies

for a variety of applications

Working on a bathroom renovation? Looking to boost low water pressure in kitchen tap, shower, bath, whole house, or commercial property? Perhaps, you need to replace a shower pump, heating circulator, or submersible. Browse through our case studies below and contact us for help achieving your project goals.

Case Studies

for a variety of applications

Working on a bathroom renovation? Looking to boost low water pressure in kitchen tap, shower, bath, whole house, or commercial property? Perhaps, you need to replace a shower pump, heating circulator, or submersible. Browse through our case studies below and contact us for help achieving your project goals.

 
All Posts Blog: Case Studies
All Posts Author: Pump World

Quiet Pump Required, Cambridge

Jul 05 2021
3
0

Quiet Pump Required, Cambridge   June, 2021

We were asked to provide a quotation for a universal twin shower pump, 2.0 Bar, with exceptionally quiet running.

Pump World’s technical team recommended a Supergen N80TX - a high quality, UK made shower pump with brass construction and continuously rated induction motor. This increases the life of the pump and decreases the noise level. The brass is cast so it is much thicker than the standard 'stamped brass' alternatives, and uniquely machined for smooth water flow. This pump is extremely quiet running and WRAS Approved. Supplied with 1.5 m mains cable and stainless steel braided hoses.

  Please pass on my thanks to the team and especially the gentleman on the technical help desk. I am over the moon with this pump, great product and super quiet which was the main reason for purchase. Very happy, many thanks again." 

- Mike, Contractor 

Boosting Large Townhouse, London

Dec 16 2020
1
0

Boosting a Large Townhouse, London   Dec, 2020

In February 2020, the Pump World technical team was asked to specify a system to boost the water pressure over 3 floors to 1 bathroom. With the cylinder size already specified by the client, we sourced a 500 litre indirect hot water cylinder with Smartcirc (N) 25-6 secondary circuit heating pump that met the sizing requirements.
We then put together a Systempro package including 800 litre break tank with insulation jacket and tank protection, Smartpro 12e booster pump, and timed water softener. The Smartpro 12e was specified for its variable speed control, which ensures a quiet-running and energy-saving performance. Supplied with full install kit including low level water protection switch, flexibles, Y strainer, and lever ball valves, the Smartpro 12e makes for a quick and easy installation with smooth, reliable operation. Similarly, the tank is supplied with full install kit, and the timed softener comes as standard with a full flow kitting kit and drinking water filter system. The complete system was supplied through Frank Finn’s local plumbers’ merchant.

  I've bought many pumped systems from Pump World and they have all worked well. They really help with their technical backup and have always been easy to get hold of.” 

- Frank Finn

 

 

 

 

Boosting a Large Townhouse, London   Dec 2020



In February 2020, the Pump World technical team was asked to specify a system to boost the water pressure over 3 floors to 1 bathroom. With the cylinder size already specified by the client, we sourced a 500 litre indirect hot water cylinder with Smartcirc (N) 25-6 secondary circuit heating pump that met the sizing requirements.
We then put together a Systempro package including 800 litre break tank with insulation jacket and tank protection, Smartpro 12e booster pump, and timed water softener. The Smartpro 12e was specified for its variable speed control, which ensures a quiet-running and energy-saving performance. Supplied with full install kit including low level water protection switch, flexibles, Y strainer, and lever ball valves, the Smartpro 12e makes for a quick and easy installation with smooth, reliable operation. Similarly, the tank is supplied with full install kit, and the timed softener comes as standard with a full flow kitting kit and drinking water filter system. The complete system was supplied through Frank Finn’s local plumbers’ merchant.

  I've bought many pumped systems from Pump World and they have all worked well. They really help with their technical backup and have always been easy to get hold of.” 

- Frank Finn     

 

Boosting a Large Townhouse, London   Dec 2020



In February 2020, the Pump World technical team was asked to specify a system to boost the water pressure over 3 floors to 1 bathroom. With the cylinder size already specified by the client, we sourced a 500 litre indirect hot water cylinder with Smartcirc (N) 25-6 secondary circuit heating pump that met the sizing requirements.
We then put together a Systempro package including 800 litre break tank with insulation jacket and tank protection, Smartpro 12e booster pump, and timed water softener. The Smartpro 12e was specified for its variable speed control, which ensures a quiet-running and energy-saving performance. Supplied with full install kit including low level water protection switch, flexibles, Y strainer, and lever ball valves, the Smartpro 12e makes for a quick and easy installation with smooth, reliable operation. Similarly, the tank is supplied with full install kit, and the timed softener comes as standard with a full flow kitting kit and drinking water filter system. The complete system was supplied through Frank Finn’s local plumbers’ merchant.

  I've bought many pumped systems from Pump World and they have all worked well. They really help with their technical backup and have always been easy to get hold of.” 

- Frank Finn     

Boosting an Irrigation System, Bristol

Oct 22 2020
3
0

Boosting an Irrigation System, Bristol   October, 2020

We were approached to specify a mains boosting set with additional spares to supply an irrigation system. Pump World’s technical team recommended the Smart-box Tank Set CAT5  as well as an insulation jacket, hose, hose accessories, and a lever ball valve.

  This was a good install to a store room behind a concierge desk of a housing development. The pump was required to supply an irrigation system. We strongly advised the client to use this model as it has such a quiet motor and being so close to the main desk. The install required us to add extra power outlet (13amp spur) plus an outside socket. The water inlet was straight forward and all lagged. The waste overflow, which feeds from the back of this unit has been hidden behind shelves and into the drain. The outlet pipe had to snake up the wall and through an old thick wall to ground level to where we fitted a 1" lever tap for the irrigation system to hook up to. The client has commented that the pump can't be heard from the desk area. Overall, the service we had from Pump World was very professional and efficient. The help we received from Nigel was very beneficial, as was Francesca." 

- David, Projects Manager at Tradeline 

 

 

 

Boosting an Irrigation System, Bristol   October 2020



We were approached to specify a mains boosting set with additional spares to supply an irrigation system. Pump World’s technical team recommended the Smart-box Tank Set CAT5  as well as an insulation jacket, hose, hose accessories, and a lever ball valve.


  This was a good install to a store room behind a concierge desk of a housing development. The pump was required to supply an irrigation system. We strongly advised the client to use this model as it has such a quiet motor and being so close to the main desk. The install required us to add extra power outlet (13amp spur) plus an outside socket. The water inlet was straight forward and all lagged. The waste overflow, which feeds from the back of this unit has been hidden behind shelves and into the drain. The outlet pipe had to snake up the wall and through an old thick wall to ground level to where we fitted a 1" lever tap for the irrigation system to hook up to. The client has commented that the pump can't be heard from the desk area. Overall, the service we had from Pump World was very professional and efficient. The help we received from Nigel was very beneficial, as was Francesca." 

- David, Projects Manager at Tradeline     

 

Boosting an Irrigation System, Bristol   October 2020



We were approached to specify a mains boosting set with additional spares to supply an irrigation system. Pump World’s technical team recommended the Smart-box Tank Set CAT5  as well as an insulation jacket, hose, hose accessories, and a lever ball valve.


  This was a good install to a store room behind a concierge desk of a housing development. The pump was required to supply an irrigation system. We strongly advised the client to use this model as it has such a quiet motor and being so close to the main desk. The install required us to add extra power outlet (13amp spur) plus an outside socket. The water inlet was straight forward and all lagged. The waste overflow, which feeds from the back of this unit has been hidden behind shelves and into the drain. The outlet pipe had to snake up the wall and through an old thick wall to ground level to where we fitted a 1" lever tap for the irrigation system to hook up to. The client has commented that the pump can't be heard from the desk area. Overall, the service we had from Pump World was very professional and efficient. The help we received from Nigel was very beneficial, as was Francesca." 

- David, Projects Manager at Tradeline     

Kitchen Tap Boosting, Suffolk

Jul 23 2020
0
0

Kitchen Tap Boosting, Suffolk   July, 2020

We were approached to specify a pump to boost hot water in a bungalow.

Pump World’s technical team recommended a Supergen 15SX - a cost effective, regenerative unit with a specially designed single impeller that aids the removal of air generated in the system. Low speed (1450 rpm) induction motor and anti-vibration rubber feet reduce transmitted noise. This pump is extremely quiet running and WRAS Approved. Supplied with 1.5 m mains cable and stainless steel braided hoses.

  Technically very helpful in understanding complex water flow problems. The pump was fitted this morning...impressively quiet...hot water now reaches the sink in one minute with full flow, previously it was 2 minutes 45 seconds with a slow flow! Thanks for all your help." 

- Jonathan, End User 

 

 

 

Kitchen Tap Boosting, Suffolk   July 2020



We were approached to specify a pump to boost hot water in a bungalow.

Pump World’s technical team recommended a Supergen 15SX - a cost effective, regenerative unit with a specially designed single impeller that aids the removal of air generated in the system. Low speed (1450 rpm) induction motor and anti-vibration rubber feet reduce transmitted noise. This pump is extremely quiet running and WRAS Approved. Supplied with 1.5 m mains cable and stainless steel braided hoses.

  Technically very helpful in understanding complex water flow problems. The pump was fitted this morning...impressively quiet...hot water now reaches the sink in one minute with full flow, previously it was 2 minutes 45 seconds with a slow flow! Thanks for all your help." 

- Jonathan, End User    

 

Kitchen Tap Boosting, Suffolk   July 2020



We were approached to specify a pump to boost hot water in a bungalow.

Pump World’s technical team recommended a Supergen 15SX - a cost effective, regenerative unit with a specially designed single impeller that aids the removal of air generated in the system. Low speed (1450 rpm) induction motor and anti-vibration rubber feet reduce transmitted noise. This pump is extremely quiet running and WRAS Approved. Supplied with 1.5 m mains cable and stainless steel braided hoses.

  Technically very helpful in understanding complex water flow problems. The pump was fitted this morning...impressively quiet...hot water now reaches the sink in one minute with full flow, previously it was 2 minutes 45 seconds with a slow flow! Thanks for all your help." 

- Jonathan, End User    

Domestic Property, Hampshire

Jun 22 2020
1
0

Domestic Property, Hampshire   May, 2020

We were approached to specify a complete system to boost cold water over 3 floors to 4 bathrooms. The water tank capacity needed to meet the demands of the full system operating for a period of 12 minutes without any recovery from the mains.

Pump World’s technical team quickly put together a combination of products that met the end user’s requirements for a quiet-running, energy efficient, high performance, and easily maintainable solution to low water pressure. This included the Smartpro 12 Plus booster pump, which can be controlled and monitored with your smartphone, two modular break tanks with insulation jackets, and a water conditioner to treat hard water coming in from the mains – all supplied via the end user’s local merchant.

  Nigel showed a wealth of experience and was very helpful in determining the solution for my property." 

- Simon, End User 

 

 

 

Domestic Property, Hampshire   May 2020



We were approached to specify a complete system to boost cold water over 3 floors to 4 bathrooms. The water tank capacity needed to meet the demands of the full system operating for a period of 12 minutes without any recovery from the mains.

Pump World’s technical team quickly put together a combination of products that met the end user’s requirements for a quiet-running, energy efficient, high performance, and easily maintainable solution to low water pressure. This included the Smartpro 12 Plus booster pump, which can be controlled and monitored with your smartphone, two modular break tanks with insulation jackets, and a water conditioner to treat hard water coming in from the mains – all supplied via the end user’s local merchant.

  Nigel showed a wealth of experience and was very helpful in determining the solution for my property." 

- Simon, End User    

 

Domestic Property, Hampshire   May 2020



We were approached to specify a complete system to boost cold water over 3 floors to 4 bathrooms. The water tank capacity needed to meet the demands of the full system operating for a period of 12 minutes without any recovery from the mains.

Pump World’s technical team quickly put together a combination of products that met the end user’s requirements for a quiet-running, energy efficient, high performance, and easily maintainable solution to low water pressure. This included the Smartpro 12 Plus booster pump, which can be controlled and monitored with your smartphone, two modular break tanks with insulation jackets, and a water conditioner to treat hard water coming in from the mains – all supplied via the end user’s local merchant.

  Nigel showed a wealth of experience and was very helpful in determining the solution for my property." 

- Simon, End User    

Urgently Required Booster Set, Belfast

May 29 2020
1
0

Urgently Required Booster Set, Belfast   May, 2020

On a Friday afternoon, we received a call urgently requiring a replacement booster set that would get a factory machine back up and running again.

We specified a Smart-box Tank Set and Insulation Jacket, which was despatched the same day and delivered to site in Belfast on the following Monday.

  Very helpful. Super quick delivery. Would not hesitate to use again or recommend." 

- Ian, Installer 

 

 

 

Urgently Required Booster Set, Belfast   May 2020



On a Friday afternoon, we received a call urgently requiring a replacement booster set that would get a factory machine back up and running again.

We specified a Smart-box Tank Set and Insulation Jacket, which was despatched the same day and delivered to site in Belfast on the following Monday.

  Very helpful. Super quick delivery. Would not hesitate to use again or recommend." 

- Ian, Installer    

 

Urgently Required Booster Set, Belfast   May 2020



On a Friday afternoon, we received a call urgently requiring a replacement booster set that would get a factory machine back up and running again.

We specified a Smart-box Tank Set and Insulation Jacket, which was despatched the same day and delivered to site in Belfast on the following Monday.

  Very helpful. Super quick delivery. Would not hesitate to use again or recommend." 

- Ian, Installer    

Large Renovation Project, North London

Jan 20 2020
1
0

Large Renovation Project, North London   November, 2019

This large renovation project, first brought to us in 2014, required a complete system for boosting cold water over 3 floors to 6 bathrooms. Our sister company, Smart Showers, was also asked to provide a steam shower system for the master bathroom for which a Charade 800 wetroom head was provided.

With large scale shower heads as well as standard water outlets to pressurise, the Pump World team specified and supplied a Smartpro Twin Pump Set, 6.0 Bar Hot Water Cylinder, Two Piece Break Tank with Raised Ball Valve Chamber and Water Treatment solutions. The pump set was also commissioned on site to ensure a reliable, quality installation within the manufacturer's warranty.

  For a true drench shower, look no further than the Italian made Charade. 80cm of edge to edge nozzles, in a slim-line design for smart water distribution without compromising on performance." 

- The Smart Showers Team  |  
www.smartshowers.co.uk 

 

 

 

Large Renovation Project, North London   November 2019



This large renovation project, first brought to us in 2014, required a complete system for boosting cold water over 3 floors to 6 bathrooms. Our sister company, Smart Showers, was also asked to provide a steam shower system for the master bathroom for which a Charade 800 wetroom head was provided.

With large scale shower heads as well as standard water outlets to pressurise, the Pump World team specified and supplied a Smartpro Twin Pump Set, 6.0 Bar Hot Water Cylinder, Two Piece Break Tank with Raised Ball Valve Chamber and Water Treatment solutions. The pump set was also commissioned on site to ensure a reliable, quality installation within the manufacturer's warranty.

  For a true drench shower, look no further than the Italian made Charade. 80 cm of edge to edge nozzles, in a slim-line design for smart water distribution without compromising on performance." 

- The Smart Showers Team  |  
www.smartshowers.co.uk 

 

Large Renovation Project, North London   November 2019



This large renovation project, first brought to us in 2014, required a complete system for boosting cold water over 3 floors to 6 bathrooms. Our sister company, Smart Showers, was also asked to provide a steam shower system for the master bathroom for which a Charade 800 wetroom head was provided.

With large scale shower heads as well as standard water outlets to pressurise, the Pump World team specified and supplied a Smartpro Twin Pump Set, 6.0 Bar Hot Water Cylinder, Two Piece Break Tank with Raised Ball Valve Chamber and Water Treatment solutions. The pump set was also commissioned on site to ensure a reliable, quality installation within the manufacturer's warranty.

  For a true drench shower, look no further than the Italian made Charade. 80 cm of edge to edge nozzles, in a slim-line design for smart water distribution without compromising on performance." 

- The Smart Showers Team  |  
www.smartshowers.co.uk 

Vessel Replacement, Wiltshire

Jan 13 2020
0
0

Vessel Replacement, Wiltshire   December, 2019

In December 2019, we were sent a photograph with a message asking us to ID and supply a replacement pressure vessel for a domestic application as the original was leaking. We specified the required vessel along with reducing bush and lever ball valve for easy install, and the equipment was collected the very same day.

  Thank you so much for all your help with the pressure vessel. It is so nice to deal with professional, knowledgeable and friendly people." 

- AB

 

 

 

Vessel Replacement, Wiltshire   December 2019



In December 2019, we were sent a photograph with a message asking us to ID and supply a replacement pressure vessel for a domestic application as the original was leaking. We specified the required vessel along with reducing bush and lever ball valve for easy install, and the equipment was collected the very same day.

  Thank you so much for all your help with the pressure vessel. It is so nice to deal with professional, knowledgeable and friendly people." 

- AB

 

Vessel Replacement, Wiltshire   December 2019



In December 2019, we were sent a photograph with a message asking us to ID and supply a replacement pressure vessel for a domestic application as the original was leaking. We specified the required vessel along with reducing bush and lever ball valve for easy install, and the equipment was collected the very same day.

  Thank you so much for all your help with the pressure vessel. It is so nice to deal with professional, knowledgeable and friendly people." 

- AB

High Flow Boosting Project, Hampshire

Oct 01 2019
1
0

High Flow Boosting Project, Hampshire   September, 2019

In September 2019, we supplied a Systempro boosting package to boost the water pressure in a large property with over 4 floors and 5 bathrooms. Included in the package were 2x 800 Litre Break Tanks and Insulation Jackets, a twin booster set, a 500 Litre Hot Water Cylinder and Water Conditioner.

Our sister company, Smart Showers, supplied the shower system for the main bathroom which incorporated a Charade wetroom shower head (80 x 80 cm), body jets, handset and thermostatic valve - all designed and made in Italy.

  For a true drench shower, look no further than the Italian made Charade. 80cm of edge to edge nozzles, in a slim-line design for smart water distribution without compromising on performance." 

- The Smart Showers Team  |  
www.smartshowers.co.uk 

 

 

 

High Flow Boosting Project, Hampshire   September 2019



In September 2019, we supplied a Systempro boosting package to boost the water pressure in a large property with over 4 floors and 5 bathrooms. Included in the package were 2x 800 Litre Break Tanks and Insulation Jackets, a twin booster set, a 500 Litre Hot Water Cylinder and Water Conditioner.

Our sister company, Smart Showers, supplied the shower system for the main bathroom which incorporated a Charade wetroom shower head (80 x 80 cm), body jets, handset and thermostatic valve - all designed and made in Italy.

  For a true drench shower, look no further than the Italian made Charade. 80 cm of edge to edge nozzles, in a slim-line design for smart water distribution without compromising on performance." 

- The Smart Showers Team  |  
www.smartshowers.co.uk 

 

High Flow Boosting Project, Hampshire   September 2019



In September 2019, we supplied a Systempro boosting package to boost the water pressure in a large property with over 4 floors and 5 bathrooms. Included in the package were 2x 800 Litre Break Tanks and Insulation Jackets, a twin booster set, a 500 Litre Hot Water Cylinder and Water Conditioner.

Our sister company, Smart Showers, supplied the shower system for the main bathroom which incorporated a Charade wetroom shower head (80 x 80 cm), body jets, handset and thermostatic valve - all designed and made in Italy.

  For a true drench shower, look no further than the Italian made Charade. 80 cm of edge to edge nozzles, in a slim-line design for smart water distribution without compromising on performance." 

- The Smart Showers Team  |  
www.smartshowers.co.uk 

Boosting a Large Property, London

May 30 2019
2
0

Boosting a Large Property, London   May, 2019

In May 2019, we were asked to specify a complete system for boosting cold water over 3 floors to 5 bathrooms and 1 cloakroom. The system comprised of a Smart-box Twin Variable Speed Booster Set and 800 Litre Break Tank with connection kit tailored to the property’s pipework – both chosen to ensure a quiet-running and energy-saving solution with enough cold water storage to meet the full system operating for a period of 10 minutes.
An insulation jacket was specified to ensure the water inside the tank does not overheat or freeze. The tank cleanse was sized up in line with the tank’s capacity to offer continual protection against pathogenic bacteria, which can grow in water systems if left untreated. The tank cleanse also prevents the build-up of scale, biofilm and rust, which are conditions that can affect water flow and valve operation.
Finally, on the hot water storage side, a 400 Litre Indirect Stainless Steel Hot Water Cylinder with specially sized coil and Smartcirc BUPA-25-4 Secondary Circuit Stainless Steel Heating Pump were specified in accordance with the end user’s hot water requirements. The complete system was supplied through Frank Finn’s local plumbers’ merchant.

  I’ve been very impressed with all the systems that I’ve bought through Pump World. They have been a great help on the technical points. Can’t recommend them enough.” 

- Frank, Frank Finn Plumbing

 

 

 

 

 

 

 

 

 

 

Boosting a Large Property, London   May 2019



In May 2019, we were asked to specify a complete system for boosting cold water over 3 floors to 5 bathrooms and 1 cloakroom. The system comprised of a Smart-box Twin Variable Speed Booster Set and 800 Litre Break Tank with connection kit tailored to the property’s pipework – both chosen to ensure a quiet-running and energy-saving solution with enough cold water storage to meet the full system operating for a period of 10 minutes.
An insulation jacket was specified to ensure the water inside the tank does not overheat or freeze. The tank cleanse was sized up in line with the tank’s capacity to offer continual protection against pathogenic bacteria, which can grow in water systems if left untreated. The tank cleanse also prevents the build-up of scale, biofilm and rust, which are conditions that can affect water flow and valve operation.
Finally, on the hot water storage side, a 400 Litre Indirect Stainless Steel Hot Water Cylinder with specially sized coil and Smartcirc BUPA-25-4 Secondary Circuit Stainless Steel Heating Pump were specified in accordance with the end user’s hot water requirements. The complete system was supplied through Frank Finn’s local plumbers’ merchant.

  I’ve been very impressed with all the systems that I’ve bought through Pump World. They have been a great help on the technical points. Can’t recommend them enough.” 

- Frank, Frank Finn Plumbing     

 

Boosting a Large Property, London   May 2019



In May 2019, we were asked to specify a complete system for boosting cold water over 3 floors to 5 bathrooms and 1 cloakroom. The system comprised of a Smart-box Twin Variable Speed Booster Set and 800 Litre Break Tank with connection kit tailored to the property’s pipework – both chosen to ensure a quiet-running and energy-saving solution with enough cold water storage to meet the full system operating for a period of 10 minutes.
An insulation jacket was specified to ensure the water inside the tank does not overheat or freeze. The tank cleanse was sized up in line with the tank’s capacity to offer continual protection against pathogenic bacteria, which can grow in water systems if left untreated. The tank cleanse also prevents the build-up of scale, biofilm and rust, which are conditions that can affect water flow and valve operation.
Finally, on the hot water storage side, a 400 Litre Indirect Stainless Steel Hot Water Cylinder with specially sized coil and Smartcirc BUPA-25-4 Secondary Circuit Stainless Steel Heating Pump were specified in accordance with the end user’s hot water requirements. The complete system was supplied through Frank Finn’s local plumbers’ merchant.

  I’ve been very impressed with all the systems that I’ve bought through Pump World. They have been a great help on the technical points. Can’t recommend them enough.” 

- Frank, Frank Finn Plumbing     







About Us

Our philosophy is to provide quality pump solutions that will be energy saving and
low on noise but still provide a high performance. 

Contact our Pump Solver on 01793 820142 for technical advice, problem solving and recommendations. Our team are here to help you put together the right package of matching equipment to optimise your system.

Pump World   A limited company, registered in England.
Company Number : 02433506.  Registered At : Unit 11 Woodside Road, Swindon, SN3 4WA.



  Subscribe to our Newsletter


Accepted Payment Methods


           
 

Text/HTML